Polk Audio Mobile Audio Amplifier Review

0
42
Polk Audio Mobile Audio Amplifier Review

Polk Audio Mobile Audio Amplifier ReviewOur Polk Audio Mobile Audio Amplifier is a functional product that doesn’t heat up easily although it has a small, sleek design.

Also, this is one that you can mount anywhere irrespective of the distance of the unit to the car battery. And guess what? It’s absolutely easy to set up even if one has a piece of basic knowledge.

There is a knob on it which makes the usability easy. However, provided you’re looking for one that has a durable feature, then this is what you need.

The casing of the unit alone is made of aluminum and the RCA is shielded with nickel so as to augment its relevance in the marketplace.

It’s one that delivers different RMS for different ohms and the output power can be regulated. As a matter of fact, there are RCA cable connections.

Absolutely, there are power, ground, and speaker connection on it. In addition, this is one that you can adjust its mechanical control and so on.

This unit delivers 1200W explicitly at 1 ohm. Of course, it’s one that’s dependable to use with subwoofers and speakers.

For comprehension sake, here are 5 major features that we’ve made ready for apt for you.

Polk Audio Mobile Audio Amplifier Review  | 5 Major Features

1. Continuous Power Delivery

The total RMS for this unit is 1200W. However, you can attain full power at 1-ohm. Nonetheless, at 4 ohms, this would deliver 500W and so on.

This is a unit that has RCA connections on it and the connections cause 0.1% distortion to the audio signal.

Of course, it works absolutely well with the audio system on automobiles and marines. In spite of its high performance, it has low THD. The implication of this is that it has a high signal to noise.

Apparently, this is one that would reproduce crisp sound to your hearing. Indeed, this occurs to all the unit regardless of the ohm that you’re using.

2. High-Speed MOSFET Switching

Additionally, this features a high bandwidth of frequency. Couple with the fact that it has a signal-to-noise ratio of 105 decibels, the signal response of this unit ranges from 20Hz to 200Hz.

There is even a monoblock on this unit. This invariably aids in augmenting the bass frequency. It even has a bass boost of 44Hz and causes a variable frequency of 40Hz-220Hz and 20Hz-38Hz for low-pass and subsonic filter respectively.

As a matter of fact, it has an input sensitivity of 200mV – 6V at a voltage of 10V-16V. The amplification of the sound is steady.

No distortion, nor noise caused in the medium at all. It’s such a one with a lucid performance.

3. Class-D Design

This is a product that has a dimension of 1 13/16″ x 6 3/4″ x 12 15/16″ and it weighs 6.5 pounds. Its terminals are plated with nickel and there are connectors at the rear.

It’s one that’s shielded with aluminum. The transformer, on the other hand, is made of stainless steel and it’s shielded with black color.

Of course, all these aids it to avoid over-heating. It simply has power connections of 4AWG, ground connections of 4AWG, and speaker connections of 12 AWG.

It’s petite and can be placed anywhere in the vehicle though it uses (car) batteries as its power source, why? Because it doesn’t get heated up so easily as some others do.

4. Adjustment

There is an option for level control. With this control, you can level the gain of wattage so as to properly manage the output wattage.

There’s even a remote subwoofer that aids in making the control very easy. Also, it features line control.

This implication of this is that it aids in the findings of audio signals. It’s just one that has a lot of amazing features to look out for.

5. Setup

The truth is that no matter how you connect the wire from the power source to it, series or parallel, the continuous power delivery of the RMS still remain the same.

Of course, using the highest gauge that can be used for it is just 4 gauge through 2 gauge can be used for it likewise.

However, please note that before one can achieve 1-ohm, the wires must be run parallel to each other. Otherwise, running them in series would only lead the wire to deliver 4-ohms.

Check The Latest Price on Amazon, Now!

Why Should You Use Polk Audio Mobile Audio Amplifier?

1. Stability

This is a product that the bass sound is crisp and constant even at 1-ohm. No matter the years of use, this one would still reproduce good sounds for your optimal pleasure.

2. Warranty

This product mostly comes with warranty, long-term warranty to be definite. And guess? You wouldn’t get it wrong because the material used for its construction have low reactivity to rust and so on.

3. Control

The bass sound production of this unit can be regulated. There is a knob that comes with it which enable it to be absolutely easy. The implication of this is to enhance the flexibility of prospective users.

4. Anti-Heat

This won’t get the fuse burnt and neither would it get the unit bogged down. In a nutshell, purchase this product and enjoy maxima comfort that you desire.

5. Dependability

This product is highly reliable, especially in the use of speakers and subsonic. Apart from the parts, the functions on it are reliable also.

Product Benefits
  • This unit has a small shape with the class-D design.
  • It’s lightweight and very easy to install.
  • It doesn’t become over-heated.
  • It features a variable low-pass filter.
  • The unit has 4 connections and there is a knob for the control of the bass sound.
  • The sound that it reproduces is lucid and crisp.
  • It uses a car battery as a power source.
  • This has an indicator that flickers whenever it becomes hot.
The Negative Things
  • None

FAQ – Frequently Asked Questions

  1. What is the highest gauge that one can use for?

Answer: 4 gauge is enough.

  1. Does this come with a warranty?

Answer: It does. However, check out the current update from the manufacturer or your prospective seller.

  1. Does this have a knob?

Answer: Yes, it does.

  1. How reliable is this product?

Answer: this is 100% reliable in all ramification.

  1. Would this kill my battery?

Answer: No, it won’t.

Final Verdict

The Polk audio amplifier for cars is one of the best product that people are raving about currently. The unit is usable with subwoofers and speakers. It causes a low disturbance in its medium and you can depend on it for the long-term.

Notwithstanding, we hope that by now, our amiable readers have come to know whether the product is genuine or not. Notwithstanding, this very product is what we have tested and trusted.

LEAVE A REPLY

Please enter your comment!
Please enter your name here